EVL PRO SCANNER 150-250 User Manual download pdf

Thank you for purchasing the EVL-micro controller.

Please read this user manual carefully.

Based on the top selling 'Mad 4-1' & 'e-pod' controllers,

the EVL microcontroller takes preprogrammed DMX controllers

another step forward..

This user friendly unit gives easy control over DMX effects via 4 strong

foot swithces that can also be pressed by hand. The EVL micro

controller features the stunning 'ASL' (Adaptive Sound to Light)*

software as used in the EVL -SPIN moonflower effect.

micro-controller comes ready to use and preprogrammed with an

almost limitless sequence of sound activated chases, slow scrolling

chases, over-rideable super strobe effects and static colours.

micro-controller is designed for easy use and enables the user rapid

control over most of the EVL product range.

Connections from the unit are simple, effects are connected by

standard DMX cable from the XLR out socket on the controller.

Fixtures are then daisy chained together.

A power unit is supplied with the controller. It is a 9V DC/500mA

type with negative centre pin (2.1 mm DC plug).

Audio input for the beat response is through the units built in

mic. Sound levels are automatically set.

THE BUTTONS (please also refer to mini-color section)

Button 1: BLACKOUT / GOBO-COL select

First press of the button is always Blackout. Each successive

press selects the next Gobo-Colour. Scanner mirrors and

Moving Heads will point forward in a midway position.

Button 2: STROBE

Pressing once will activate a fast strobe effect in the current

Gobo-Colour as pre selected by button 1 to all linked heads.

Pressing the button again will activate a WHITE strobe effect

to all linked effects, and also activates a 'Pro Strobe' if

connected.

Please note that the first initial press of this button enables

the time sequenced strobe patterns within the sound to light

preprogrammes.......

IF STROBE EFFECTS ARE NOT REQUIRED DO NOT PRESS.

Button 3: SOUND to LIGHT

Press to activate the 'ASL' (Adaptive Sound to Light)*

programmes via the built in mic. These programmes are

designed so that Scanners, Stars, Spins and Moving Heads

can be used in pairs or multiple pairs to give an odd/even

sequence set up.

Each additional press of this button will manually advance

the current step within the auto programmes. Holding down

this button for 2 seconds will activate independent 'local'

mode to all connected heads that have local sound to light

compatibility.

Heads without on-board local mode will continue to be

activated from e-pods sound to light programmes and also

e-pods smooth mode. This allows a combination of heads

operating in their own local mode and heads being controlled

by e-pods smooth mode.

Pressing the Sound to Light button again will reactivate the

e-pod's preprogrammes to all the linked heads.

Button 4: SMOOTH MODE

DMX ADDRESS SETTINGS FROM THE CHART BELOW MUST BE USED

WHEN OPERATING EVL EFFECTS FROM THE MICRO CONTROLLER.

Spin 250H c038 (4,7,8 down)

c044 (4,6,7 down)

* EVL's Adaptive Sound to Light (ASL) system reads the musical

style and beat patterns. This results in stunning light shows

locked into the sounds structure & groove.

mini250color pack

(Dip switch settings

on driver unit only)

c080 (1,2,3,4,6,8

9,DOWN)

n/a

10 11 12

BUTTON OPERATION with mini250color pack

BLACKOUT / GOBO-COL select

First press gives white dimming up to full power. Each press selects 1

of 10 colours. The next press will activate a colour scroll effect.

Press again for black out. Also Press this button to blackout when in

any other mode.

STROBE

The mini color does not have a strobe effect but when this botton is

pressed the heads go into a sound activated colour 'pulsing' effect.

Press again to activate a white only 'pulse' effect.

SOUND TO LIGHT

Press to activate the 'Adaptive Sound to light' system. The effects

will alternate through single & paired patterns. (Heads 1 & 3 and

2 & 4 are paired.)

SMOOTH MODE

Press this to activate slow ambient colour scrolls and selections.

EVL PRODUCT HEAD 1 channel HEAD 2 channel

Mini Spot 150SA c001 c011

Mini Spot 150/250 c022 c030

(180degree movement)

Mini Spot 150/250 c051 c065

(360degree movement)

EVL Scanners c101 c109

EVL Stars c085 c093

EVL micro controller V4

Press to activate the Slow 'Sound to Light mode.

(This is a smoothambient version of Button 3).

Slow scrolling patterns and soft ambientmovements

are created when button 4 is held down for 3 seconds.

This mode does not rely on a sound input.

Pro Strobe c049 (1,5,6 down) n/a

Pro color 1200 c208 n/a

EVL Spirit projector c135 (1,2,3,8 down) c141 (1,3,4,8 down)

EVL k-scope projector c194 (2,7,8 down) c198 (2,3,7,8 down)

EVL led head36 c168 c181

NEW EVL-250CMY c212 n/a

color changer

10 11 12 1

Summary of Contents

Page 1 - 10 11 12

Thank you for purchasing the EVL-micro controller.Please read this user manual carefully.Based on the top selling 'Mad 4-1' & 'e-po

EVL PRO SCANNER 150-250 User Manual

Browse online or download User Manual for Floodlights EVL PRO SCANNER 150-250. Thank you for purchasing the EVL-micro controller. Please read this

Summary of Contents

More documents for Floodlights EVL PRO SCANNER 150-250

Comments to this Manuals

EVL PRO SCANNER 150-250 User Manual

Browse online or download User Manual for Floodlights EVL PRO SCANNER 150-250. Thank you for purchasing the EVL-micro controller. Please read this

Summary of Contents

More documents for Floodlights EVL PRO SCANNER 150-250

Comments to this Manuals

Related products and manuals for Floodlights EVL PRO SCANNER 150-250